huanyu  
   
Position :Home>Information>Sodium alginate viscosity decrease rate method for determination
■ Product list
Sodium alginate

……………………………………………

Textile printing grade sodium alginate
……………………………………………

Food grade sodium alginate

……………………………………………

pharmaceutical grade sodium alginate
……………………………………………

potassium alginate

……………………………………………

alginic acid

……………………………………………

mannitol
……………………………………………
Iodine
……………………………………………

Sodium alginate viscosity decrease rate method for determination

Release date:2014-03-11


  1. Principle:
    Sodium alginate moisture at 40 ℃ water bath condition for 6 hours, and its viscosity is measured and compared with the viscosity ratio of warming, the difference between the two and the heat preservation of viscosity, expressed as a percentage.

  2. Instrument and equipment:

    Rotational viscometer; super heater: 40 ± 0.5 ℃
  3. Measuring steps:
    The sodium alginate 6G, on the 15mm ×150mm in vitro, cup plug nozzle, with a layer of plastic film sealing, the tube is completely immersed in sodium alginate temperature constant temperature water bath is 40 ± 0.5 ℃, holding 6 days and nights out, with 1% sodium alginate solution and test its viscosity.

  4. The results calculated :
    Sodium alginate viscosity reduction rate is calculated according to the following formula. :
    X1=(A0-A1)÷A0×100
    X4 —— viscosity decrease rate, unit (%);
    A0 ——Sodium alginate thermal insulation before the viscosity ,unit( mPa·s);
    A1 ——Sodium alginate thermal insulation after the viscosity ,unit( mPa·s);

  5. Repeatability:
    Sodium alginate samples each of two parallel samples were determined after insulation,with its arithmetic mean value as thermal insulation after the viscosity . The relative deviation of two parallel samples results shall not be more than 3%.
Lianyungang huanyu seaweed co., LTD. Mainly produces sodium alginate
All rights reserved © lianyungang huanyu seaweed co., LTD., China's jiangsu ICP 09067152-2